Simple ruleset for a workstation

fw.basic

table ip filter {
     chain input {
          type filter hook input priority 0;

          # accept traffic originated from us
          ct state established,related accept

          # accept any localhost traffic
          iif lo accept

          # count and drop any other traffic
          counter drop
     }
}

fw6.basic

table ip6 filter {
        chain input {
                 type filter hook input priority 0;

                 # accept any localhost traffic
                 iif lo accept

                 # accept traffic originated from us
                 ct state established,related accept

                 # accept neighbour discovery otherwise connectivity breaks
                 icmpv6 type { nd-neighbor-solicit, echo-request, nd-router-advert, nd-neighbor-advert } accept

                 # count and drop any other traffic
                 counter drop
        }
}

fw.inet.basic

The inet table is available from Linux kernel 3.14 and allow to make an IPv4 and IPv6 table. There is mostly a single change compared to previous ruleset which is the inet keyword.

table inet filter {
        chain input {
                 type filter hook input priority 0;

                 # accept any localhost traffic
                 iif lo accept

                 # accept traffic originated from us
                 ct state established,related accept

                 # accept neighbour discovery otherwise connectivity breaks. daddr filter is a workaround to set l3 protocol.
                 ip6 nexthdr icmpv6 icmpv6 type { nd-neighbor-solicit, echo-request, nd-router-advert, nd-neighbor-advert } accept

                 # count and drop any other traffic
                 counter drop
        }
}