Multiple NATs using nftables maps

From nftables wiki
Revision as of 12:02, 28 August 2020 by Arturo (talk | contribs) (add see also section with pointer to general docs on NAT)
Jump to navigation Jump to search

Thanks to nftables Maps, if you have a previous iptables NAT (destination NAT) ruleset like this:

% iptables -t nat -A PREROUTING -p tcp --dport 1000 -j DNAT --to-destination 1.1.1.1:1234
% iptables -t nat -A PREROUTING -p udp --dport 2000 -j DNAT --to-destination 2.2.2.2:2345
% iptables -t nat -A PREROUTING -p tcp --dport 3000 -j DNAT --to-destination 3.3.3.3:3456

It can be easily translated to nftables in a single line:

% nft add rule nat prerouting dnat \
      tcp dport map { 1000 : 1.1.1.1, 2000 : 2.2.2.2, 3000 : 3.3.3.3} \
      : tcp dport map { 1000 : 1234, 2000 : 2345, 3000 : 3456 }

Likewise, in iptables NAT (source NAT):

% iptables -t nat -A POSTROUTING -s 192.168.1.1 -j SNAT --to-source 1.1.1.1
% iptables -t nat -A POSTROUTING -s 192.168.2.2 -j SNAT --to-source 2.2.2.2
% iptables -t nat -A POSTROUTING -s 192.168.3.3 -j SNAT --to-source 3.3.3.3

Translated to a nftables one-liner:

% nft add rule nat postrouting snat \
      ip saddr map { 192.168.1.1 : 1.1.1.1, 192.168.2.2 : 2.2.2.2, 192.168.3.3 : 3.3.3.3 }

See also