Jumping to chain

From nftables wiki
Revision as of 20:39, 23 July 2019 by Admin (talk | contribs)
Jump to navigation Jump to search

Like in iptables, you can structure your rule-set in using a tree of chains. To do so, you first need to create the non-base chain via:

% nft add chain ip filter tcp-chain

The example above creates the tcp-chain which will be used to add rules to filter tcp traffic, eg.

% nft add rule ip filter input ip protocol tcp jump tcp-chain

We can just add a simple rule to that tcp-chain to count packets and bytes:

% nft add rule ip filter tcp-chain counter

The listing should show something like:

% nft list table filter
table ip filter {
        chain input {
                 type filter hook input priority 0;
                 ip protocol tcp jump tcp-chain
        }

        chain tcp-chain {
                 counter packets 8 bytes 2020
        }
}

The counters should update by generating simple TCP traffic.

Note: You can only jump to non-base chains.

jump vs goto

Please note the difference between jump and goto.

  • If you use jump to get packet processed in another chain, packet will return to the chain of the calling rule after the end.
  • However, if you use goto, packets will be processed in another chain but they will not return to the chain of the calling rule. In this case, the default policy applied to the packet will be the default policy of the original base chain which started processing the packet.

Example of jump:

Packet is: SRC=1.1.1.1 DST=2.2.2.2 TCP SPORT 111 DPORT 222

table ip filter {
        chain input {
                 type filter hook input priority 0; policy accept;
                 # this is the 1º matching rule
                 ip saddr 1.1.1.1 ip daddr 2.2.2.2 tcp sport 111 tcp dport 222 jump other-chain
                 # this is the 3º matching rule
                 ip saddr 1.1.1.1 ip daddr 2.2.2.2 tcp sport 111 tcp dport 222 accept
        }

        chain other-chain {
                 # this is the 2º matching rule
                 counter packets 8 bytes 2020
        }
}

Example of goto:

Packet is: SRC=1.1.1.1 DST=2.2.2.2 TCP SPORT 111 DPORT 222

table ip filter {
        chain input {
                 type filter hook input priority 0; policy accept;
                 # this is the 1º matching rule
                 # default policy 'accept' will be applied after other-chain ends processing
                 ip saddr 1.1.1.1 ip daddr 2.2.2.2 tcp sport 111 tcp dport 222 goto other-chain
                 # this rule will never be reached by this packet!
                 ip saddr 1.1.1.1 ip daddr 2.2.2.2 tcp sport 111 tcp dport 222 accept
        }

        chain other-chain {
                 # this is the 2º matching rule
                 counter packets 8 bytes 2020
        }
}

Note that only jump and goto actions to basechains are allowed.